cancel
Showing results for 
Search instead for 
Did you mean: 

Apple Watch pairing error

JonathanB
Community Moderator
Community Moderator

Hi everyone,

We've moved everything relating to Apple Watch pairing issues to this new conversation and will be providing all future updates as edits to this post, so that you won't need to go searching through the comments for these.

I appreciate these pairing errors must be very frustrating, especially for those of you that have been running into issues for several weeks now. Technical specialists are continuing to look into this, however based on what they've seen so far, this does not seem to be one overall fault that we can apply a blanket fix to.

With this in mind, please make sure you have followed the advice on the private message we've sent to each of you, this will ensure that your individual case has been escalated. We've originally sent these messages out a couple of weeks ago, so I'll double check that everyone that has commented has received these. You can find your community messages by clicking on your avatar in the top right of any page, then on "Messages".

Finally, please ensure you are following the Community House Rules when posting on the community, particularly points 8 and 13.

The private message mentioned above will put you in touch with a team that you can raise a complaint with should you wish to do so, any comments that share details of individual Three employees will be removed from the community.

JonathanB


**Update 26/10/2022**

Hi everyone,

We really appreciate your patience whilst we've been working on this issue. I can't imagine how frustrating it is to not be able to take full advantage of your Apple watches.

As I mentioned last week above, the errors do not seem to be one overall fault that can be fixed immediately for everyone. We do need a specialist team to do some work in the background on your accounts. With this in mind, I'd advise the following:

  • Make sure you've taken any action we've recommended on private messages to your community account. If you're experiencing these issues and we don't already know, please reply on this post so we can reach out.
  • Do not repeatedly attempt unpairing and pairing, this may be interfering with the work done in the background. Please wait for a Three representative to contact you and advise before you unpair and pair again.

We've seen some great progress towards getting this sorted in the last few days, I'm hopeful that it won't be too much longer till this issue is fully resolved for everyone.

JonathanB


**Update 17/11/2022**

 Hi everyone,

We’re really sorry that there’s been a considerable delay between updates on the errors with Apple watch pairing. As we’ve mentioned previously there is more than one error involved and specialist teams are working hard to address the root causes of these.

I assure you that all comments about this issue are read, and all feedback given is being escalated on a daily basis.

Whilst we’re working on this, we’d be grateful if you can do the following:

  • If you’re new to this thread, please either private message me, or add a reply, and I’ll direct you to a team that can help further.
  • If I’ve already sent you this information, please ensure you have spoken to that team.
  • Please only unpair and re-pair your watch if directed to by one of our support teams as part of the troubleshooting and investigation of your issue.

I’ll provide another update soon.

Thanks,
JonathanB


**Update 02/12/2022**

Hi everyone,

Thanks for your continued patience. We’ve seen some great progress towards resolving these issues since the last update. As I’ve mentioned previously there is more than one error involved, and for many of you, your bill cycle will also affect when you can successfully re-pair the service.

Here’s some general steps that should help with common scenarios we’re seeing.

  • Ensure that you’ve registered for My3, without a registered online account and password set, the pairing will fail.
  • There are some instances where special characters at the start of My3 passwords have resulted in an error. We recommend that you have a strong password that is a combination of upper and lower case letters, numbers, and special characters but avoid beginning the password with characters like /!”£$|\. My3 supports these, but it seems to be causing an issue when this info is passed onto the smartwatch pairing system.
  • If you’ve changed your priceplan, upgraded, or are instructed to wait for your bill cycle to complete, you should wait till the day after your new bill cycle starts to attempt pairing. So for example, if your allowances refresh on the 1st, wait till the 2nd.
  • Although individual smartwatches can be unpaired from your account, cancelling or removing the add on completely will delay being able to reinstate the service till the following bill cycle.
  • As mentioned before, don’t repeatedly unpair and re-pair, the failed requests may cause further issues on your account that delay this being solved.
  • I’m continuing to regularly check for anyone new on the thread, just send a reply or private message me, and I’ll link you in with a support team that can help get your specific error looked into and make sure you get the best advice.

Thanks,
JonathanB


**Update 11/01/2023**

Hi Everyone,

As well as the steps on the last update, we're finding it helps to clear your temporary data from your iPhone before attempting pairing.

You can do this in Settings, Safari, Clear History & Website Data.

In case anyone is having trouble finding their private messages, click on your avatar image in the top right of any community page, then "Messages". If you've posted on this thread, then you should have a message waiting from me with a link to a support team that will help.

Thanks,
JonathanB



Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query.


787 REPLIES 787
Kadrong
Active

071F5D13-D054-44E4-B526-2E371F83C947.jpeg

 and three finally admit there is a problem

StephR
Employee
Employee

Thanks for getting back to us, Kadrong. 

It's not that we've created the service to work this way, but instead a technical limitation that's impacting a small number of customers. This isn't the expected experience, and I'm really sorry it's delayed your use of the cellular features of your new Apple Watch.

To fix this, please wait until your next bill date, then unpair your Apple Watch. Once that's done, you can start the pairing process again from scratch using the smartwatch app on your new iPhone 14. 

This has obviously been a really disappointing experience for you, so I've also dropped you a PM with a little more information on how to report that. 

Thanks again for sharing your experience here on Three Community. Do let us know how things go, we're keen to make sure this is sorted for you.

StephR



Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query. 


Kadrong
Active

It is clear that Three has ran out of excuses on this issue.. according to another staff of Three “the smartwatch pairing service is full active and pairing on your watch” got a list of steps to follow (none of which work). The addon isn’t displaying on My3 account and showing that I have no addon active or available but was told that there is one on the account.. Three now came to the conclusion that the issue is Apple which seem to be at end of their script. I have now come to the conclusion that Three Network doesn’t have the facility or expertise nor the technology to offer this services to its customers but developed a strategic marketing plan to pull customers in with this overbearing promises in offering iWatch mobile services when it failed to deliver on this promise. I will be taking this matter to the ombudsman.. here is three trying to convince me that there is an addon and that it is active (check chat logs) and is fully paired when there are no addons.. this is a mockery of someone who has supported this network for over 10 years

813A0C7E-0605-413E-B64C-38AC91112913.jpeg

JonathanB
Community Moderator
Community Moderator

Hi @Kadrong,

I'm sorry to hear that you're still experiencing these issues getting your smartwatch pairing set up. What you've been describing matches a priority fault that is under investigation at the moment. I'll let you know as soon as there's any update on this.

JonathanB



Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query.


Kadrong
Active

Please relay this information to your colleagues because some isn’t even aware you are offering smartwatch pairing addon until I asked them visit your website

Kadrong
Active

Frankly, this error should be an easy fix.. this error is similar to someone who walked in a bar to receive a onetime free beer then when back after drinking to have the bartender recognising that person who already had the free beer

Kadrong
Active

So my next billing date was today and as the image attached show.. same problem. How long will Three lead it’s customers down this long dark road of false promises and incorrect solutions?

4CA131E2-BD19-4804-87EF-FC20C6DA7745.png

Kadrong
Active

And as usual no one seem to bother.. the call centre is a case of stress

Gary
Involved

I like a fool have been through 4 billing cycle’s and was promised it would work so I’m lost as being disabled in wheelchair with one lg I just want to go out with Watch and leave phone at home and not lose it please some guidance is needed 

Pred
Regular

Did you get this working? Seems like every single person has the same thing