cancel
Showing results for 
Search instead for 
Did you mean: 

Intermittent connection issues loading/changing site- secure connection failed/site can't be reached

EDIflyer
Involved

Is anyone else occasionally getting a 'connection down' error from Chrome (or 'Secure Connection Failed' from Firefox) when changing page - if I hit refresh it works fine. At first I wondered if it was the site I was using but have noticed it on multiple different major websites over the past couple of months and not noticed it from other locations where I don't use Three Broadband so does seem to be related to the router/connection (this is via wired Ethernet too, so not a WiFi problem).  I've tried changing DNS server in case that helps but no difference.

It mainly seems to happen when trying to first load a site or (annoyingly) at checkout when a different site is being loaded as part of the checkout process.  It certainly doesn't happen everytime but does happen with reasonable frequency.  I've also noticed I often get it when trying to pull/push from/to Github too and have to do so a number of times for it to work (browsing the Github website works fine).

 
I'm using a NR5103E with Firmware Version V1.00(ACBJ.0)b14 - I tried rebooting it but to no effect.

EDIflyer_0-1697984212494.pngEDIflyer_1-1697984219294.png

 
 

EDIflyer_4-1697984241361.png

 

499 REPLIES 499
EDIflyer
Involved

Yep I find online payments particularly buggy - just at the time you don't want a transaction to fail!

BrummyGit
Active

With the help of a user on another forum, I have worked out that my consistent inability to reach certain websites is due to the Adult Content filter (even though they aren't adult sites). Turning it off has resolved that issue.

I have a slim hope that it also solves the intermittent secure sites problem, but I honestly doubt that. Time will tell

baztm
Regular

I get the error inconsistently on seemingly any website. For now your link seems to be working, but I had facebook throw up the connection dropped earlier.

Tatablack
Regular

Hi! If you check my previous post on page 2 of this thread, you'll see the method I used to test connections (from the command line).

Could you also verify that switching your router to 4G "solves" the issue?

By the way, I tried the website you mentioned, and indeed it fails consistently, even though with a different error than others:

curl: (35) LibreSSL/3.3.6: error:1404B419:SSL routines:ST_CONNECT:tlsv1 alert access denied

If I try it from my mobile, after switching to the mobile network, I can confirm it works without problems.

BrummyGit
Active

I tried switching to 4G recently but whilst it reduced the number of instances, I did still have problems. My hunch is that it is loading related (not sure if that's my local connection or the 5G network) - I have been using the internet quite a lot today, however there is very little load, and I haven't had a single occurrence. It could be that slower 4G speeds mask the issue.

I only run windows and therefore your test won't work for me.

BrummyGit
Active

I've been trying to further diagnose my issue and have the following information that might be helpful:

  • Most of my errors are SSL errors or QUIC protocol issues on Chrome
  • I see more problems in an evening than during the day - network load related?
  • Swapping the IP Passthrough mode does NOT solve the problems
  • Disabling IPv6 everywhere in the router config does not solve the problems
  • Using external DNS directly from my clients does not solve the problems

This is frustrating as I am in my 30 day returns window and I was hoping to find a faster alternative to my BT FTTC service however it currently isn't reliable enough as I work from home. Is there any option for me other than cutting my losses?

applepieman
Active

So can you tell us if an issue has been identified? knowing that will make waiting slightly easier. 

JonathanB
Community Moderator
Community Moderator

Hey @applepieman,

I'm sorry, we're still working on this but there's an ticket open which has been tied to the actual Three accounts of several of the posters on this thread, and I'm chasing this every chance that I get.

Thanks,
Jonathan



Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query.


JonathanB
Community Moderator
Community Moderator

Hi everyone,

Thanks for your patience. I just want to reassure you all that the issue is still being looked into, and we'll solve this as soon as we can.

Thanks,
Jonathan



Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query.


EDIflyer
Involved

Thanks, glad to hear it is still being worked on - I was a bit surprised to receive an email from the Social Media team a few days ago asking if everything was sorted and working again when it was so clear on here that it hadn't been! 

It would be great to understand a bit about where the issue has reached and a potential ETA re any fix.