Intermittent connection issues loading/changing site- secure connection failed/site can't be reached

EDIflyer · ‎10-22-2023

Is anyone else occasionally getting a 'connection down' error from Chrome (or 'Secure Connection Failed' from Firefox) when changing page - if I hit refresh it works fine. At first I wondered if it was the site I was using but have noticed it on multiple different major websites over the past couple of months and not noticed it from other locations where I don't use Three Broadband so does seem to be related to the router/connection (this is via wired Ethernet too, so not a WiFi problem). I've tried changing DNS server in case that helps but no difference.

It mainly seems to happen when trying to first load a site or (annoyingly) at checkout when a different site is being loaded as part of the checkout process. It certainly doesn't happen everytime but does happen with reasonable frequency. I've also noticed I often get it when trying to pull/push from/to Github too and have to do so a number of times for it to work (browsing the Github website works fine).

I'm using a NR5103E with Firmware Version V1.00(ACBJ.0)b14 - I tried rebooting it but to no effect.

EDIflyer · ‎11-28-2023

Thanks for the update, @JonathanB . It's quite disappointing that the engineers haven't been able to replicate it given how many of us has posted re issues. I had a look at the links and most of them seem very generic and not necessarily applicable as they are referring to Chrome/Firefox when a lot of us have also confirmed the issue on mobile phones (on WiFi), smart TVs, headless Linux devices, etc.

However one of the later solutions was more interesting - re flushing the DNS cache. I followed the more detailed guidance at https://devconnected.com/how-to-flush-dns-cache-on-linux/ as well as the Windows guidance at https://kinsta.com/knowledgebase/flush-dns/ and when running the code from @Tatablack from upthread (slightly adjusted below) I've noted a marked improvement with no errors after 100 curl requests:

for i in {1..100}; do curl -I --no-progress-meter -o /dev/null https://github.com || true; done;

I'm not certain it's 100% sorted yet but I'm going to try running things without the VPN for a bit and see how I get on (although for shop check-outs I might still pop it back on for a bit just in case!)

EDIflyer · ‎11-28-2023

Just to update - still seeing it occasionally, albeit much less than before...

for i in {1..100}; do curl -I --no-progress-meter -o /dev/null https://github.com || true; done;
curl: (35) OpenSSL SSL_connect: Connection reset by peer in connection to github.com:443

BrummyGit · ‎11-29-2023

Interestingly I just ran into a problem updating my Home Assistant software. It was consistently failing pulling updates from the GitHub, however swapping to my BT FTTC service saw it update first attempt. Here is an extract from the log:

[140242398730048] Error updating Home Assistant Supervisor: Update of Supervisor failed: Can't install ghcr.io/home-assistant/amd64-hassio-supervisor:2023.11.6: 500 Server Error for http+docker://localhost/v1.43/images/create?tag=2023.11.6&fromImage=ghcr.io%2Fhome-assistant%2Famd64-hassio-supervisor&platform=linux%2Famd64: Internal Server Error ("Head "https://ghcr.io/v2/home-assistant/amd64-hassio-supervisor/manifests/2023.11.6": Get "https://ghcr.io/token?scope=repository%3Ahome-assistant%2Famd64-hassio-supervisor%3Apull&service=ghcr.io": EOF")
[140242301068992] Error updating Home Assistant Supervisor: Update of Supervisor failed: Can't install ghcr.io/home-assistant/amd64-hassio-supervisor:2023.11.6: 500 Server Error for http+docker://localhost/v1.43/images/create?tag=2023.11.6&fromImage=ghcr.io%2Fhome-assistant%2Famd64-hassio-supervisor&platform=linux%2Famd64: Internal Server Error ("Get "https://ghcr.io/v2/": EOF")
[140242171198016] Error updating Home Assistant Supervisor: Update of Supervisor failed: Can't install ghcr.io/home-assistant/amd64-hassio-supervisor:2023.11.6: 500 Server Error for http+docker://localhost/v1.43/images/create?tag=2023.11.6&fromImage=ghcr.io%2Fhome-assistant%2Famd64-hassio-supervisor&platform=linux%2Famd64: Internal Server Error ("Get "https://ghcr.io/v2/": EOF")
[140242121040064] Error updating Home Assistant Supervisor: Update of Supervisor failed: Can't install ghcr.io/home-assistant/amd64-hassio-supervisor:2023.11.6: 500 Server Error for http+docker://localhost/v1.43/images/create?tag=2023.11.6&fromImage=ghcr.io%2Fhome-assistant%2Famd64-hassio-supervisor&platform=linux%2Famd64: Internal Server Error ("Head "https://ghcr.io/v2/home-assistant/amd64-hassio-supervisor/manifests/2023.11.6": Get "https://ghcr.io/token?scope=repository%3Ahome-assistant%2Famd64-hassio-supervisor%3Apull&service=ghcr.io": EOF")
[140242121040064] Error updating Home Assistant Supervisor: Update of Supervisor failed: Can't install ghcr.io/home-assistant/amd64-hassio-supervisor:2023.11.6: 500 Server Error for http+docker://localhost/v1.43/images/create?tag=2023.11.6&fromImage=ghcr.io%2Fhome-assistant%2Famd64-hassio-supervisor&platform=linux%2Famd64: Internal Server Error ("Get "https://ghcr.io/v2/": EOF")

EDIflyer · ‎11-29-2023

@JonathanB although improved definitely still not fixed - still seeing intermittent issues when I'm not on VPN.

23-11-29 22:17:04 ERROR (MainThread) [supervisor.supervisor] Update of Supervisor failed: Can't install ghcr.io/home-assistant/armv7-hassio-supervisor:2023.11.6: 500 Server Error for http+docker://localhost/v1.43/images/create?tag=2023.11.6&fromImage=ghcr.io%2Fhome-assistant%2Farmv7-hassio-supervisor&platform=linux%2Farm%2Fv7: Internal Server Error ("Get "https://ghcr.io/v2/": EOF")

BrummyGit · ‎11-29-2023

I can't see my earlier reply on this topic, but I also had the same issues updating Home Assistant this evening whilst connected to Three Broadband using my FWA710 not NR5103e. I tried repeatedly before swapping to my BT FTTC service where it worked first attempt.

I am not seeing intermittent page loading issues on this new router, but the problem getting content from GitHub was exactly the same for me tonight.

JonathanB · ‎11-30-2023

Hey @BrummyGit,

Sorry about that, our automated Spam filter must have not liked something about the post. I think it may have seen the text and URLs in the log extract as a bit suspicious. I've restored the post now though.

Thanks,
JonathanB

Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query.

BrummyGit · ‎11-30-2023

Thank you @JonathanB - this is interesting that I suffered the same issue with GitHub using a FWA710 router therefore it's either a general issue with Zyxel firmware or, most likely, caused by something in Three's infrastructure. I would tend to suspect something like transparent proxy services, content scanning or similar. This might also explain the intermittent nature of the problem as it could be load related.

As an example, we recently had an issue at work where the client's proxy servers were unable to cope with the load and started dropped what it considered to be "long lived" sessions. This meant that some applications that relied on continuous connections failed. It may be that the GitHub Get isn't given long enough to complete before the connection is dropped.

However I still don't understand why GitHub was consistently failing (just like some of my previous examples where it turned out to be the adult content filter) and other pages where it's relatively infrequent. I haven't had any of the infrequent issues since swapping router.

tucu · ‎11-30-2023

Tried this, made no difference. It was better for a few days when I switched APNs, but the problem is still there. Interestingly, the error is different for me:

curl: (35) LibreSSL SSL_connect: SSL_ERROR_SYSCALL in connection to github.com:443

The fact that a VPN fixes the issue AND that @BrummyGit still had issues with another router makes me wonder what kind of networking monitoring does Three do 🤔 (I did try disabling the adult filter as suggested in another thread - made no difference either).

AlSeek · ‎12-01-2023

Thanks for the update @JonathanB. I've tried all these suggestions but no difference for me. Also tried the DNS flush suggested by @EDIflyer but soon had the usual error on affected websites. TBH I don't think it makes sense to be a local device issue since, as mentioned in the past, switching my router to use 4G only pretty much resolves the issue besides a very rare instance but 5G is extremely badly affected, if it were a local device issue of DNS cache or otherwise I'd expect similar incidence on 4G and 5G. (I have primarily been using 4G this last month besides occasionally going to 5G to check if it's still an issue, which it severely is).

BrummyGit · ‎11-28-2023

I got fed up with the problems as I need a reliable and fast connection, therefore decided to try an expensive fix. I bought myself a Zyxel FWA710 5G outdoor router and mounted it in my loft next to the Three supplied NR5103E, then swapped my SIM over.

For the last week running with the FWA710 using the latest OEM firmware and IP Passthrough mode I haven't experienced any issues other than a loss of service overnight at the weekend that I suspect was mast maintenance as it started at exactly 2am and lasted an hour.