Apple Watch pairing error

[JonathanB]

Hi everyone,

We've moved everything relating to Apple Watch pairing issues to this new conversation and will be providing all future updates as edits to this post, so that you won't need to go searching through the comments for these.

I appreciate these pairing errors must be very frustrating, especially for those of you that have been running into issues for several weeks now. Technical specialists are continuing to look into this, however based on what they've seen so far, this does not seem to be one overall fault that we can apply a blanket fix to.

With this in mind, please make sure you have followed the advice on the private message we've sent to each of you, this will ensure that your individual case has been escalated. We've originally sent these messages out a couple of weeks ago, so I'll double check that everyone that has commented has received these. You can find your community messages by clicking on your avatar in the top right of any page, then on "Messages".

Finally, please ensure you are following the Community House Rules when posting on the community, particularly points 8 and 13.

The private message mentioned above will put you in touch with a team that you can raise a complaint with should you wish to do so, any comments that share details of individual Three employees will be removed from the community.

JonathanB

---

**Update 26/10/2022**

Hi everyone,

We really appreciate your patience whilst we've been working on this issue. I can't imagine how frustrating it is to not be able to take full advantage of your Apple watches.

As I mentioned last week above, the errors do not seem to be one overall fault that can be fixed immediately for everyone. We do need a specialist team to do some work in the background on your accounts. With this in mind, I'd advise the following:

• Make sure you've taken any action we've recommended on private messages to your community account. If you're experiencing these issues and we don't already know, please reply on this post so we can reach out.
• Do not repeatedly attempt unpairing and pairing, this may be interfering with the work done in the background. Please wait for a Three representative to contact you and advise before you unpair and pair again.

We've seen some great progress towards getting this sorted in the last few days, I'm hopeful that it won't be too much longer till this issue is fully resolved for everyone.

JonathanB

---

**Update 17/11/2022**

 Hi everyone,

We’re really sorry that there’s been a considerable delay between updates on the errors with Apple watch pairing. As we’ve mentioned previously there is more than one error involved and specialist teams are working hard to address the root causes of these.

I assure you that all comments about this issue are read, and all feedback given is being escalated on a daily basis.

Whilst we’re working on this, we’d be grateful if you can do the following:

• If you’re new to this thread, please either private message me, or add a reply, and I’ll direct you to a team that can help further.
• If I’ve already sent you this information, please ensure you have spoken to that team.
• Please only unpair and re-pair your watch if directed to by one of our support teams as part of the troubleshooting and investigation of your issue.

I’ll provide another update soon.

Thanks,
JonathanB

---

**Update 02/12/2022**

Hi everyone,

Thanks for your continued patience. We’ve seen some great progress towards resolving these issues since the last update. As I’ve mentioned previously there is more than one error involved, and for many of you, your bill cycle will also affect when you can successfully re-pair the service.

Here’s some general steps that should help with common scenarios we’re seeing.

• Ensure that you’ve registered for My3, without a registered online account and password set, the pairing will fail.
• There are some instances where special characters at the start of My3 passwords have resulted in an error. We recommend that you have a strong password that is a combination of upper and lower case letters, numbers, and special characters but avoid beginning the password with characters like /!”£$|\. My3 supports these, but it seems to be causing an issue when this info is passed onto the smartwatch pairing system.
• If you’ve changed your priceplan, upgraded, or are instructed to wait for your bill cycle to complete, you should wait till the day after your new bill cycle starts to attempt pairing. So for example, if your allowances refresh on the 1st, wait till the 2nd.
• Although individual smartwatches can be unpaired from your account, cancelling or removing the add on completely will delay being able to reinstate the service till the following bill cycle.
• As mentioned before, don’t repeatedly unpair and re-pair, the failed requests may cause further issues on your account that delay this being solved.
• I’m continuing to regularly check for anyone new on the thread, just send a reply or private message me, and I’ll link you in with a support team that can help get your specific error looked into and make sure you get the best advice.

Thanks,
JonathanB

---

**Update 11/01/2023**

Hi Everyone,

As well as the steps on the last update, we're finding it helps to clear your temporary data from your iPhone before attempting pairing.

You can do this in Settings, Safari, Clear History & Website Data.

In case anyone is having trouble finding their private messages, click on your avatar image in the top right of any community page, then "Messages". If you've posted on this thread, then you should have a message waiting from me with a link to a support team that will help.

Thanks,
JonathanB

[Wayne2612]

I've not had chance to get involved with a lengthy chat about my issue with them, but it doesn't seem as if spending hours chatting to them about it actually solves anything. No wonder they give you 6 months free on the 24 month plan that I signed up for. Probably takes them 6 months to actually get your watch working!

[Weepete]

Exact same story as me. What a shower of liars!

[christopherg]

Good morning,

I have also been having connectivity issues with a new Apple Watch. The watch and phone pair perfectly via the iPhone app. For some reason, the chat and telephone support operators automatically assume that this is the issue, which is not the case.

When I try to ‘Set Up Mobile Service’ the following message appears: ‘There’s a problem’. I do not get any further than this and do not have a chance to enter Three login details.

I have spent hours speaking to both chat and telephone operators and unfortunately, they are clueless. Initially, I followed their advice with the unpairing / restarting etc, however, it soon became clear that this wasn’t going to help, and the issue is at their end. At this point, they astonishingly advised that I speak to Apple, probably to get rid of me.

Well, I did speak to Apple, and they confirmed that the issue is with the carrier, Three, and not the device.

Furthermore, I have just been into a Three store and their employee also confirmed that the issue is with the carrier, Three, and he does not know if or when this will be resolved.

[dizzyraccoon95]

Hi JonathanB - I PMd you earlier today. 

Upgraded to Apple Watch Ultra 2 - got the E53305 error immediately when try to setup the Mobile Service plan on the new device, then to my horror stumbled across this thread which goes back well over 12 months of people having this issue. I'm sure my exact symptoms are repeated many times before, so I won't go into much more details other than a couple of screenshots below:

1) This is on the original Apple Watch Series 5 that was using the Three Mobile data plan. I factory reset this Apple Watch initially, stupidly assuming that's all I needed to do and that the new Ultra 2 would just seamlessly pair - how wrong I was. Anyway, I've repaired the original Series 5 with the intention of "cleanly" removing the data plan and removing all trace of it from Three's servers - but I can't sign back in to the mobile plan area - the (correct) Three credentials fail constantly:

2)  And here with have the dreaded E53305 message when I try and activate the Three mobile data plan on the new Ultra 2:

Hopefully you can reply soon to the PM and help me out....

thanks

[muzzy2007]

Same issues on ultra 2 but someone told me it could be a billing issue so you can’t pair your watch until the next bill has cycled 

[Pawel]

hello error There's a problem
E53305-You already have a paired device I've been struggling for 3 days, I've been referred to consultants 100 times, nothing works, I'll probably have to give up this network and return their plan

[muzzy2007]

Same here been passed backwards and forwards. Yesterday I called and basically three said it’s an Apple problem go speak to them. I come back to three but now having a lot of regrets👎

[ChloeC]

Hi there. I am also getting the missing field error when trying to pair my series 9 watch. I can’t get past the three login screen despite trying the troubleshooting steps already suggested on this forum.

[dizzyraccoon95]

Hiya - You may have already tried this - but I reset my Three web login password to only contain letters - no numbers or any special characters - after doing that, that Three web form accepted the new "simple" password and logged in 🙂 

[ChloeC]

Thanks for the message. I did try that and it hasn’t seemed to make a difference for me so I don’t think that’s the problem here 😔