cancel
Showing results for 
Search instead for 
Did you mean: 

5G Hub ZTE MC801 B12 update

5Ghub_house
Active

I have the Three branded ZTE MC801 5G hub router. We have been with Three since July 2022. When we setup the router it was on the B09 update and we had no issues with it and got around 450Mb download speeds. Our 5G signal is around -95dBm. Then on 17th Oct 2022 our router automatically installed the B12 update. After that the router stops working at least once per day, sometimes more than once per day. When it stops working all mobile devices, laptops and the chromecast will display exclamation marks on the WiFi signal logo. If you try to navigate to any website the page will fail to load. If I log onto the router at 192.168.0.1 it all looks OK and small levels of kb are being downloaded/uploaded. The only way to fix is to either go to advanced settings > other > restart. Or walk to the router and unplug from mains power. Upon restarting the router everything is fine again and speedtest shows our usual 450Mb again. I have got so fed up that I have tried doing the factory reset on the router. This seemed to work and we went 4 days without any issue. But it happened again today. I strongly believe it was the B12 update as we didn't have the issue when it was on B09. Wish I didn't leave the default setting for automatic updates now. I have checked three.co.uk coverage page and network and looked up network maintenance and it does say they are fixing an issue in the area. However that has stayed like that for over a week. Just curious if anyone else is having an issue with the B12 update or whether it could be maintenance that is taking weeks to fix? Any thoughts?

  • 5G
Best solution
Best solution
5Ghub_house
Active

Since our router got the update BD_UKH3GMC801AV1.0.0B15 i have had no issues. It updated on 2nd March 2023 to B15. I believe this is the solution. If your router hasn't updated to BD_UKH3GMC801AV1.0.0B15 then I suggest calling Three customer care

View solution in conversation

31 REPLIES 31
T5G-Hub-zte
Fledgling

Hi  

I have the same hub Three ZTE MC801 5G since Dec2022 and from day one getting the same problem. Cutoff at least 3-4times a day for 4-5mints. Even Three replaced Hub with another ZTE Hub still problem remains. Hoping to resolve with new upgrade. Thanks for sharing.

Thanks

T5G-Hub-zte
Fledgling

Hi  

I have the same hub Three ZTE MC801 5G since Dec2022 and from day one getting the same problem. Cutoff at least 3-4times a day for 4-5mints. Even Three replaced Hub with another ZTE Hub still problem remains. Hoping to resolve with new upgrade. Thanks for sharing.

Thanks

anotherstuart
Fledgling

Now nothing is bringing super speed back and it's down to 0.5 sometimes. This is hopeless. Can we get the new modem? The app that is supposed to help you place or well doesn't even connect to this one!

Best solution
5Ghub_house
Active

Since our router got the update BD_UKH3GMC801AV1.0.0B15 i have had no issues. It updated on 2nd March 2023 to B15. I believe this is the solution. If your router hasn't updated to BD_UKH3GMC801AV1.0.0B15 then I suggest calling Three customer care

awestrope
Fledgling

I have had my hub about 2 weeks. Worked fine the first week. Now requiring daily reboots. Three Support saying it is a network issue crashing the router. This feels unlikely. Software Version BD_UKH3GMC801AV1.0.0B15

_bomber
Fledgling

Not necessarily: my problems (the same issues that everyone has withy b12) only started when my router updated to b15 last week.

Willow2492
Regular

Is your problem still good since the update? I'm also on B15 since 2nd March but the issue of drop outs still persists. I'm using my router in bridge mode so not using wifi.

stevekn
Involved

I have that firmware on my ZTE modem and it drops out several times a day.

A restart re-connects straight away. Perhaps its a ZTE hardware issue ?

adii_ii
Fledgling

When did this get released im on BD_UKH3GMC801AV1.0.0B10

JonathanB
Community Moderator
Community Moderator

Hi @adii_ii,

Usually your router should update to the latest software overnight or after a couple of reboots. So if you've just got it, this ought to update after a day or two. If not I'd recommend to contact the Broadband team to see if they can remotely update this for you.

Thanks,
Jonathan



Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query.