5G Outdoor Hub Y5-210MU

Sal09 · ‎10-03-2025

Hi All,

I hope are well.

Is there a way/setting to prevent Signal Strength Led on Y5-210MU from going to sleep.

Please advise.

Thanks

Sal

JonathanB · ‎12-03-2025

Hi @Sal09,

Sorry there isn't an option to keep the display enabled permanently. It temporarily gives info to help you find the optimal place to install the hub, but after this is in place it's not intended to be used again, unless you need to reposition the hub later.

Rebooting the hub should switch the display back on, should you need to check your signal or move the hub to a new location.

Hope this helps,
Jonathan

Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query.

View solution in conversation

JonathanB · ‎12-03-2025

Hi @Sal09,

Sorry there isn't an option to keep the display enabled permanently. It temporarily gives info to help you find the optimal place to install the hub, but after this is in place it's not intended to be used again, unless you need to reposition the hub later.

Rebooting the hub should switch the display back on, should you need to check your signal or move the hub to a new location.

Hope this helps,
Jonathan

Mod tip! The author of a post can hit 'Accept as Solution', to highlight a reply that helped solved their query.

Sal09 · ‎13-03-2025

Firmware on my Outdoor Hub got updated other day and now I can access the 192.68.0.1 hub's web interface which helps. Now I can keep an eye out on signals that way.